Adapter for IV-22 VFD Module | 荧光管显示模块转接板

严 泽远发布

IV-22 VFD Module | 荧光管模块 设计之初就考虑到了外接电源与I、O接口的连接问题,同QS30-1辉光管显示模块一样,我也为她设计了专用的Adapter转接板。
原本,模块与模块之间均采用的是单排弯脚的8Pin排针和排母,这些针脚包括所有的控制I/O和电源接口,所以对于应用来讲,要连接电源适配器或者Arduino等控制模块需要朋友们自己动手用杜邦线连接,无法用MiniUSB线直接为模块供电,有了这个转接板,可以方便的使用DC3.5/1.35接口的直流电源或者MiniUSB接口直接为模块供电,见下图:

转接板可与IV-22 VFD Module完美匹配,另外集成了高品质DC3.5-1.35电源插座和MiniUSB插座,6针的I/O接口可用于连接主控设备,另外8位弯脚排母可轻松对接级联的VFD Module。
SHOW一下和VFD Module组合起来的效果:

在设计方面,整个厚度和长度与VFD Module完全一致,搭配协调,并且在底层电路板用镀金字符标识了I/O接口名称;
SHOW一下各个角度的细节:

 

DIY是一种享受,享受的是过程,更是结果……

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

硬件设计:严泽远
QQ:6626209
Mobile:18602007878
WebSite:https://nixieclock.org
E-mail:yanzeyuan@163.com


严 泽远

☑男性☑80后☑已婚☑没大房☑没好车☑没钱☑没工作☑没......

2 条评论

Leonard Bothma · 2018 年 12 月 27 日 下午 6:25

hello i purchased the adapter and module for [Limited release] IV-22 VFD Nixie Module fluorescent tube display module for Arduino. I still need the power supply and the connection to the adapter to operate the units. I also need to know how many of these units i can link in series? My email is oracletheos@gmail.com

    ♂唯有→奋斗 · 2018 年 12 月 27 日 下午 9:33

    Hi, if you connect less than 4pcs modules in series, you need connect them with an adapter and powered by a 5V/1A power supply with DC3.5/1.3 plug. If you’re going to using 6pcs in series, please prepare a 5V/1.5A-2Apower supply. Thanks.

♂唯有→奋斗进行回复 取消回复

邮箱地址不会被公开。 必填项已用*标注

error: Content is protected !!